The Oxo is a contemporary stove with real character. The Invicta Oxo has an oval body with a slightly angled face to the stove. Stove available in anthracite - there is an option for stainless steel panels. They contrast well with the black cast iron, and have vents in to allow hot air into the room, for an extra cost . At 10kW this is a stove suited to the medium sized room, and will certainly be a talking point in any house.
The flue outlet is attached onto a a 45 degrees outlet on rear of the stove and is orientated upwards but can be
turned 180 degrees to orientate into a rear outlet if desired.
This stove needs a 135-155mm adaptor.
|FLUE DIAMETER||150 MM|
|MAX HEAT OUTPUT||20 kW|
|NOMINAL HEAT OUTPUT||10 kW|
|MIN HEAT OUTPUT||5 kW|
|FLUE OUTLET||Top and Rear|
|HEIGHT TO CENTRE REAR FLUE||610 MM|
|DEFRA APPROVED FOR SMOKE CONTROL AREAS||No|
|CAN HAVE 12MM HEARTH||Yes|
|TESTING STANDARD||EN13240, Flamme Verte|
|MAX LOG LENGTH||370 MM|
Ring Stovesonline on 0845 226 5754 | 01803 712316 | 01580 201385 When you ring Stovesonline you will never be held in a queue, given options or made to listen to music. If we are too busy to answer immediately then simply leave your name and number on the answer phone and we will ring you straight back.
Or write to us via our enquiry system
|135-155mm flue adaptor||£67.00|
|Invicta Oxo woodburning stove with steel sides||£1,019.00|
The Invicta Oxo woodburning stove includes free delivery within the orange area on the map. Further delivery details.
When you order your Invicta Oxo woodburning stove from us it can come with any three of the following four things:
When you are finalising your order with one of our team please just let them know if you would like to take advantage of this offer and, if so, which of the three items you would like. These items need to be specified when your order is placed.
We pride ourselves on offering a great service before, during, and after you have dealt with us. We hope this will quickly becomes apparent to you. At the same time we like to balance that by being competitive and we are keen for you to choose us. If you happen to be offered a better deal elsewhere then we do not want to lose you so please let us know and we will do our best to match or beat it.
Would you like us to design & spec. your chimney or liner system? Just use our
Flue Design Service
Some people think that a chimney needs bends in it to work properly. This is not true, in fact a chimney will work better without bends in it. In Victorian houses you often see bends in the chimney where the chimney bends to avoid the fireplace in the room upstairs