Broseley eVolution 26 boiler stove
This high output boiler stove is both solidly built and beautifully designed. It has an output to water of 16 kW, enabling it to take care of most heating system and domestic hot water demands on its own. The inner steel box gives it airtightness, allowing the combustion to be finely controlled, while the high quality castings give it great looks and the ability to store and spread warmth.
With an output from 10 kw to the room this has the ability to warm a big space. However the combustion rate is very controllable, and coupled with the fact that it also has a thermostat, this means that it is easy to select exactly the you want at any time. We estimate a minimum output somewhere in the region of 4kW to the room and 6.4kW to water.
A high efficiency level of 78% is going to give you the most heat possible from your wood and the low emissions and cleanburning combustion means that it can even be installed in a smokeless zone. The eVolution 26 has also been built to the high standards required for a solid fuel boiler to be connected directly into a sealed heating system and there is an optional kit available to add on the extra components needed to do this. The Broseley Evolution 26 can also be installed into an open vented system.
Installation of boiler stoves can only legally be undertaken by properly qualified and trained heating engineers and linking in solid fuel appliances with pressurised heating systems requires specialist training. We can design the complete system, talk you through the installation requirements and provide a properly trained heating engineer.
- Flue Diameter150mm
- FuelWOODBURNING ONLY
- Nominal Heat Output26kW
- Ecodesign ReadyNo
- Energy Efficiency ClassA
- Nominal Output to Water16kW
- Nominal Output to Room10kW
- Flue OutletTop
- Direct Air SupplyYes
- Defra ExemptYes
- Can Have 12mm HearthYes
- Defra ExemptYes
Broseley eVolution 26 boiler stove Extras
A length of single skin flue pipe allows you to connect your Broseley eVolution 26 boiler stove stove to your chimney. Please ask a member of our team to explain the different lengths and types of flue component which you can pick from.
A magnetic stove pipe thermometer which will stick your first length of fluepipe and help you to keep your Broseley eVolution 26 boiler stove running within the correct burning range - so not too cool, where you could be creating tar in your chimney, or too hot, where you are wasting fuel and risk damaging your appliance.
You can contact us by phone:
- Mainline: 0800 246 1250
- Jack: 01237 473 900
- Rachael: 01308 458938
- Susi: 01803 712 316
You can use our enquiry system to send us a message through the website.
Or you can email us via email@example.com
You can use our Flue Design Service to have your chimney system designed by our experts, it's all included when you choose to work with us.