Stovax Riva 66 Stove
The Riva 66 is a landscape inset stove available in a choice of two colours, metallic storm or midnight black metallic. The Riva 66 has a heat output of 8kw and has a 150mm diameter flue outlet. The Riva 66 can be installed in smoke controlled areas with the addition of the smoke control kit.
Heat from the Riva 66 stove can be spread from two optional ducts coming off the top of the inset stove to the same room or other rooms in the house and with the optional fans fitted this heat can be actively blown. At 8kW the Riva 66 stove is suited to the medium sized room, or as secondary heating in a large room. If heat is ducted to other rooms in the house then the Riva 66 inset gives out less heat to the room in which it is installed, meaning that in that case the size of room for which this stove is suited can be revised down a little.
The Riva 66 inset stove is a little deeper than the 55 so if you want to install it into a British fireplace opening then the stove will protrude a little from the wall. Luckily there is a deep frame which takes care of this type of installation and of course you can easily install the Riva 66 into a new wall construction or into a new chimney breast.
- Flue Diameter150mm
- Min Heat Output2.4kW
- Nominal Heat Output8kW
- Ecodesign ReadyYes
- Energy Efficiency ClassA+
- Flue OutletTop
Stovax Riva 66 Stove Extras
A length of single skin flue pipe allows you to connect your Stovax Riva 66 Stove stove to your chimney. Please ask a member of our team to explain the different lengths and types of flue component which you can pick from.
A magnetic stove pipe thermometer which will stick your first length of fluepipe and help you to keep your Stovax Riva 66 Stove running within the correct burning range - so not too cool, where you could be creating tar in your chimney, or too hot, where you are wasting fuel and risk damaging your appliance.
You can contact us by phone:
- Mainline: 0800 246 1250
- Jack: 01237 473 900
- Juliet: 01580 201385
- Susi: 01803 712 316
For flue and technical enquiries please call Ben: 01803 712361
You can use our Flue Design Service to have your chimney system designed by our experts, it's all included when you choose to work with us.