316 grade single skin stainless steel flue pipe comes in 125mm, 150mm, 175mm and 200mm (5", 6", 7" or 8") diameter and in pipe lengths of 250mm, 500mm, 750mm and 1000mm, all with or without an inspection door.
We have a full range of stove flue pipe elbows and bends as well as 90 and 135 degree Tees (a Tee is an elbow with an access branch. A 90 degree Tee is always used for a rear flue when the chimney is lined).
Once installed, stainless steel flue can be sprayed with a black heat resistant paint if required
125mm systems - building regulations advise a mimimum flue size of 150mm and HETAS installers may not fit or connect to a 125mm system. Read more about 125mm flue systems here.
We can supply a full range of Specials to Order for those who need single skin stainless flue pipe that is that little bit different.
All prices are inclusive of VAT
|Single skin stainless flue pipe||Product||125mm||150mm||175mm||200mm|
|FLUE PIPE LENGTHS|
|337-500MM ADJUSTABLE LENGTH||£58.25||£58.25||£69.00||£72.00|
|587-1000MM ADJUSTABLE LENGTH||£93.50||£93.50||£104.25||£115.00|
|FLUE PIPE LENGTHS WITH DOOR|
|250MM LENGTH WITH DOOR||£58.25||£58.25||£67.50||£78.00|
|500MM LENGTH WITH DOOR||£70.50||£70.50||£81.25||£95.00|
|750MM LENGTH WITH DOOR||£96.75||£96.75||£105.75||£116.50|
|1000MM LENGTH WITH DOOR||£109.00||£109.00||£124.00||£144.25|
|FLUE PIPE BENDS / ELBOWS AND TEES|
|90 DEGREE TEE||£104.25||£104.25||£115.00||£127.25|
|135 DEGREE TEE||£121.25||£121.25||£127.25||£144.25|
|15 DEGREE ELBOW||£38.50||£38.50||£41.25||£46.75|
|30 DEGREE ELBOW||£38.50||£38.50||£41.25||£46.75|
|45 DEGREE ELBOW||£38.50||£38.50||£41.25||£46.75|
|15 DEGREE ELBOW WITH DOOR||£69.00||£69.00||£78.00||£88.75|
|30 DEGREE ELBOW WITH DOOR||£69.00||£69.00||£78.00||£88.75|
|45 DEGREE ELBOW WITH DOOR||£69.00||£69.00||£78.00||£88.75|
|90 DEGREE ELBOW WITH DOOR||£85.75||£85.75||£96.75||£110.50|
|JOINT CLIPS FOR FLUE PIPE||£10.75||£10.75||£11.50||£12.25|
|WALL BAND COMPLETE||£21.50||£21.50||£23.00||£23.50|
|SPUN ADAPTORS FOR FLUE PIPE|
Our Clearline Black enamel flue pipe comes in various diameters and lengths as shown below. Clearline flue pipe lengths are available with an access door for sweeping but most modern stoves can be swept straight through the stove so the door is not always needed.
An advantage of Clearline is the very clean look when installed. Most enamelled flue pipe has a larger female socket which means you get a bulge at each join. Clearline has a slightly smaller male end (like most types of stainless steel flue pipe) which means that all you get at each join is an unobtrusive line.
We have a full range of enamel flue pipe elbows, tees, wall bands and adaptors available. Trim rings finish off the wall penetration if the flue pipe is used to connect up to an existing masonry chimney and the damper unit has an integral flue damper built in.
Clearline flue pipe comes in a matt black finish.
If you need a glossy black finish or another colour then we can of course supply it but would need to shift to another type of enamelled flue pipe - please just ask us when you contact us, it is no problem.
|ClearLine Enamelled Flue Pipe||Product||100mm||125mm||150mm||175mm||200mm|
|FLUE PIPE LENGTHS|
|ADJUSTABLE LENGTH 330MM-200MM||£42.25||£42.25||£45.88||£64.61|
|FLUE PIPE LENGTHS WITH DOOR|
|1000MM LENGTH WITH DOOR||£56.75||£59.57||£61.91||£71.69||£74.03|
|500MM LENGTH WITH DOOR||£44.75||£46.44||£47.16||£54.76||£56.56|
|330MM LENGTH WITH DOOR||£43.50||£43.68||£45.12||£51.14||£53.49|
|ENAMELLED ELBOWS AND TEES|
|15 DEGREE ELBOW||£38.65||£39.90|
|15 DEGREE ELBOW WITH DOOR||£64.57||£60.83|
|30 DEGREE ELBOW||£38.65||£39.90|
|30 DEGREE ELBOW WITH DOOR||£60.83||£64.57|
|45 DEGREE ELBOW||£36.75||£38.65||£39.90||£50.79||£53.19|
|45 DEGREE ELBOW WITH DOOR||£54.00||£60.83||£64.57||£73.77||£79.03|
|90 DEGREE TEE||£52.34||£52.34||£53.10||£84.76||£88.85|
|WALL BRACKETS AND ADAPTERS|
|CONTINENTAL STOVE ADAPTER||£42.13||£44.40|
|ENAMELLED WALL BRACKET||£19.37||£19.37||£19.37||£23.25||£25.00|
|STANDARD TRIM RING||£22.79||£22.79||£28.71||£52.34|
|SPLIT TRIM RING||£44.35||£46.53||£51.47||£53.65|
The clay liner adapter is designed to easily make a tar tight connection to existing clay liners. A spigot inserts up into the liner and the shoulder of the adapter then pushes up to meet the liner. Any tar that gets outside of the spigot is led back into the flue system through the shoulder. The clay liner adapter is held in place by two tabs either side of the skirt/shoulder. These tabs bend out and have screw holes for fixing.
I recommend allowing for a little bit of play in the flue pipe between the clay liner adapter and the stove, especially if the flue comes out of the top exit of the stove and straight up into the adapter. The stove expands a little when hot and so this needs to be taken up somewhere so make sure that there is a little bit of play. Consider using high temperature silicone as a sealant at the stove spigot or fire rope with fire cement on top.
Available for use with 175mm, 200mm and 225mm clay liners.
|Clay liner adapter||Product||125mm||150mm||175mm||200mm|
|ADAPTERS FOR CLAY LINERS|
|ADAPTER FOR 175MM CLAY LINERS||£102.00||£102.00|
|ADAPTER FOR 200MM CLAY LINERS||£102.00||£102.00||£102.00||£102.00|
|ADAPTER FOR 225MM CLAY LINERS||£102.00||£102.00||£102.00||£102.00|
The clay liner sump adapter is a neat solution to an all too common problem. Often clay liners are installed badly without using the correct starter component. This leaves a flat surface (often a cast concrete slab or concrete lintels) to try to make a tar tight connection to. The sump adapter has a wide brim that is sealed to the surface available using high temperature silicone. A spigot then inserts into the flue pipe of the stove and any tar goes back into the flue pipe because of the shape of the sump adapter.
These Sump adapters are available with a 280mm or 330mm sized dish.
|CLAY LINER SUMP ADAPTER||Product||125mm||150mm||175mm||200mm|
|SUMP ADAPTER - 280MM DISH|
|SUMP ADAPTER WITH 280MM DISH||£74.50||£80.25||£85.50|
|SUMP ADAPTER - 330MM DISH|
|SUMP ADAPTER WITH 330MM DISH||£74.50||£80.25||£85.50||£92.25|