Bruno T12 Woodburning Stove
The Bruno T12 woodburning stove comes in a black metal industrial finish clearly letting you see how the convection tubes form the body of the wood stove. Giving up to 22kW of heat to the room the Bruno T12 woodburning stove needs to be installed into a large space.
The Bruno T12 is a woodburning stove and can take firewood logs up to 790mm long, almost three times the length of a 'normal' log.
Bruno stoves are supplied with a 90 degree swept bend that includes a catalytic converter to ensure a super clean burn with low particle count. To use the catalytic converter with UK standard flue you will need a continental adaptor and a straight length with sweeping access to allow the chimney to be swept. It is important to note that damp wood will permanently damage the catalytic convertor. Our technical flue experts can advise on the installation of this part if required.
- Flue Diameter150mm
- FuelWood Burning
- Nominal Heat Output22kW
- Max Heat Output22kW
- Flue OutletRear
- Height to Centre Rear Flue620mm
Bruno T12 Woodburning Stove Extras
A length of single skin flue pipe allows you to connect your Bruno T12 Woodburning Stove stove to your chimney. Please ask a member of our team to explain the different lengths and types of flue component which you can pick from.
A magnetic stove pipe thermometer which will stick your first length of fluepipe and help you to keep your Bruno T12 Woodburning Stove running within the correct burning range - so not too cool, where you could be creating tar in your chimney, or too hot, where you are wasting fuel and risk damaging your appliance.
You can contact us by phone:
- Mainline: 0800 246 1250
- Susi: 01803 712 316
- Jack: 01237 473 900
- Juliet: 01580 201 385
For flue technical enquiries please call Ben: 01803 712361
You can use our enquiry system to send us a message through the website.
You can use our Flue Design Service to have your chimney system designed by our experts, it's all included when you choose to work with us.