Morso Badger convector stove
The Morso Badger convector stove looks that bit different with its two wide simple legs raising the stove relatively high off the ground. Convector stoves have an extra layer of metal on the outside with an air gap between the 2 sheets of metal. The heat from the stove warms the air within this gap and slits then distribute the heat to the room. This is why the Morso Badger convector stove is wider than the standard Badger stove. Because it is a convector stove the sides are not as hot to the touch which can be a consideration if you have children that may touch the stove.
The Badger convector has the quality that you would expect from a Morso – the cast iron is very nicely finished, the door mechanism is reassuringly solid, the fire easily controllable. The Badger convector stoves comes with airwash as standard and is a cleanburning stove.
- Flue Diameter125mm
- Nominal Heat Output5kW
- Ecodesign ReadyYes
- Flue OutletRear, Top
- Height to Centre Rear Flue629mm
- Direct Air SupplyYes
- Can Have 12mm HearthYes
Morso Badger convector stove Extras
A length of single skin flue pipe allows you to connect your Morso Badger convector stove stove to your chimney. Please ask a member of our team to explain the different lengths and types of flue component which you can pick from.
A magnetic stove pipe thermometer which will stick your first length of fluepipe and help you to keep your Morso Badger convector stove running within the correct burning range - so not too cool, where you could be creating tar in your chimney, or too hot, where you are wasting fuel and risk damaging your appliance.
A Stovesonline firewood moisture meter - regardless of which stove you choose one thing which always has a huge effect on how well it will work is how dry your firewood is. Our moisture meter allows you test and measure that yourself.
You can contact us by phone:
- Mainline: 0800 246 1250
- Susi: 01803 712 316
- Jack: 01237 473 900
- Rachael: 01308 458 938
You can use our enquiry system to send us a message through the website.
Or you can email us via firstname.lastname@example.org
You can use our Flue Design Service to have your chimney system designed by our experts, it's all included when you choose to work with us.