High temperature header tanks

These high temperature header tanks are essential for boiler stoves installed to open vented systems. The boiler stove has a vent pipe that goes into the top of the F&E (feed and expansion) tank. If the system overheats for some reason the resulting steam then vents through this pipe safely into the header tank. This means that the tank can potentially get very hot indeed with the top part being heated to above 100ºC by the steam. What you do not want is the tank becoming soft and then potentially spilling the very hot contents. Not only would this be potentially dangerous, especially if there is a bedroom below, it would also be at the best a nuisance and at the worst cause extensive damage to your house: if the tank spills out then of course cold water would probably flow freely from the ball valve in the tank until it was noticed. Why take the risk?

These high temperature header tanks are made from copper, they are insulated so that they stand less chance of freezing in your loft, come with a lid, and have all ther parts needed including a metal float and ball valve.

The 40litre high temperature header tank is 520mm in diameter and 420mm high.
The 65litre tank is also 520mm in diameter and 660mm high.

Model	Product Code	Price
40LT HIGH TEMPERATURE HEADER TANK	HITEMPHEADER40	£295.00 inc. VAT	Quantity
65LT HIGH TEMPERATURE HEADER TANK	HITEMPHEADER65	£385.00 inc. VAT	Quantity

People also bought

Flue thermostat

Installed on your flue pipe a flue stat is an accurate way of switching your load unit pump or heating pump on when your stove is on, and switching it off when the stove has gone out.

Expansion vessels for Thermal Stores

Expansion vessels allow for the expansion and contraction of water in a sealed heating system as it heats and cools. We supply larger than standard sizes which are needed to go alongside our thermal stores.

LK 810 ThermoMat G load unit

£609.79 inc. VAT

LK 551 Hydromix 35-65C Mixer Valve 22mm

The LK 551 Hydromix helps to ensure that the hot water in your house is scald-safe, reduce heat losses in the pipework, and reduce mixing in your thermal store.

£109.09 inc. VAT

Overheat Safety Valve Pressurised Systems

This Overheat Safety Valve gives protection for boiler stoves installed on pressurised heating systems. If the stove overheats then mains water flushes through an internal heat exchange coil in the stove cooling it down.

£129.36 inc. VAT

Save £879

Parkray Stoves

Parkray Aspect 14B Eco boiler stove

RRP £3,199£2,320.01 inc. VATSave up to £879

LK Armatur Load units

The LK load units are built in Sweden to a very high specification and are designed to provide long term use and give accurate control of the water flow from a boiler stove. They are the unit of choice by most of our installers these days as they're so well made, so reliable and yet priced really well. The full unit, comprising the valve, pump, thermosyphon by-pass and gauges, comes as a neat and compact unit complete with insulating cover.

£602.72 inc. VAT

Opus Stoves

Opus Calypso

The Opus Calypso is a stylish modern stove that looks and burns like the designer stove it is, but hidden inside is a boiler that will heat your domestic hot water and radiators while you’re enjoying the flames.

£3,485 inc. VAT