Stella 3 H1000 inset stove
The largest of the Stella 3 models, the H1000 offers the maximum size of viewing glass. The frameless vertical lift glass door means that whichever way you are using this stove, with the door open like a traditional fireplace, or with the door closed as a controllable stove, the bottom of the door frame does not block the view of the flames.
As with all Fondis inserts, this model is designed to give some radiant warmth from the glass but with the majority of its output being released up near the ceiling as warm air. This gives it the ability, if it is turned up, of heating a big space but ensures that it isn't ever too warm around the stove itself. Once the room is comfortable the stove can be turned down to run slowly, giving out only a small amount of warmth but keeping a good flame pattern.
Fondis fires are very controllable and can be run fast when they are first lit to get lots of warmth into the room and then burnt slowly at tick over just to keep things cosy.
The Stella H1000 has a direct air spigot enabling all of the air required for combustion to enter the stove from the outside.
Why not see what this stove will look like in your house? The Fondis Visualiser uses Augmented Reality to let you see what your Fondis stove will look like in your room using the camera on your smartphone or tablet. The Fondis Visualiser instructions can be found here or in the brochure.
- Flue Diameter250mm
- Min Heat Output6.8kW
- Nominal Heat Output13.5kW
- Ecodesign ReadyYes
- Energy Efficiency ClassA
- Flue OutletTop
- Direct Air SupplyYes
You can contact us by phone:
- Mainline: 0800 246 1250
Juliet: 01580 201385
- Susi: 01803 712 316
You can use our enquiry system to send us a message through the website.
Or you can email us via firstname.lastname@example.org
You can use our Flue Design Service to have your chimney system designed by our experts, it's all included when you choose to work with us.