Overheat Safety Valve Pressurised Systems

£129.36 inc. VAT

In Stock Now

Quantity

We accept:

Buy now pay later with Paypal credit

If you prefer to talk to a real person, contact us by phone or email

An overheat safety valve provides protection to a boiler stove that has been designed for installation onto pressurised systems.

How does this work?
The boiler stove will have a copper finned coil inside the boiler jacket, this is called a quench coil. The over heat valve has a sensor probe which is fitted into an immersion pocket on the boiler stove, if the heat sink radiator does not get rid of the excess heat in an emergency (temperatures in excess of 97 deg C) then the valve will release cold mains water through the quench coil which will cool down the boiler temperature.

Technical specs:
3/4 Inch female valve connections
1/2 Inch male x 145mm sheath
1300mm probe length
97ºC release temperature

Weight	2kg

1 day delivery available from just £13. For more information about deliveries, visit our delivery information page.

It's easy to call us

Mainline: 0800 246 1250
Susi: 01803 712 316
Christine: 01308 458938
Stovespares Jane: 01580 201 385
Heating Enquiries: 01803 714474
Flue technical enquiries only - Andy: 01803 712 361

At Stoves Online you'll never be given options, put on hold or left listening to music. You'll be answered straight away by a knowledgeable member of staff. If we're already on the phone then leave your number and we'll ring you straight back.

You can use our enquiry system to send us a message through the website.

Or you can email us via info@stovesonline.co.uk

Start a Flue Design

You can use our Flue Design Service to have your chimney system designed by our experts, it's all included when you choose to work with us.

People also bought

Flue thermostat

Installed on your flue pipe a flue stat is an accurate way of switching your load unit pump or heating pump on when your stove is on, and switching it off when the stove has gone out.

LK 840 3 way valves

LK840 3 way valves are used, with an electronic controller, to adjust the mixed temperature going to a home's heating system, or within a boiler.

Cordivari Thermal Stores

These Cordivari thermal stores provide everything from very simple buffers for biomass and wood, to ones suitable for solar thermal, and domestic hot water production. Their removable soft insulation means that they are a bit lower in price, as well as sometimes being easier to get into tight spaces.

High temperature header tanks

High temperature header tanks are essential for vented boiler stove installations. These copper high temperature F&E tanks can easily take temperatures in excess of 110ºC – which standard header tanks cannot.

EnergyStore Bio Duo Thermal Stores

The EnergyStore Bio Duo is a thermal store specifically designed by us for use with wood and wood pellet boilers where solar thermal is not installed. High insulation values means heat can be stored up when the boiler is running, whilst the internal heat exchangers provide instant hot water for washing and bathing.

EnergyStore Bio Prime Thermal Stores

The EnergyStore Bio Prime is a high spec thermal store designed for use as a buffer or bulk heat storage tank, for wood pellet, log gasification, and woodchip boilers. There are no coils or stratification plates in this tank, if these are required then please look at the EnergyStore Bio Duo and Bio Quattro tanks.

Expansion vessels for Thermal Stores

Expansion vessels allow for the expansion and contraction of water in a sealed heating system as it heats and cools. We supply larger than standard sizes which are needed to go alongside our thermal stores.

Stove external air ventilation kits

A stoves which can take its air from an external air duct really makes sense in modern, well sealed houses. A flexible aluminium 100mm duct can be extended to 1.5m with a choice of external grilles. If you need a run of more than 1.5m then please contact us to order a custom external air kit.

LK 810 ThermoMat G load unit

£609.79 inc. VAT

Woodfire Stoves

Woodfire Passiv Boiler Stove

£2,870 inc. VAT

LK 551 Hydromix 35-65C Mixer Valve 22mm

The LK 551 Hydromix helps to ensure that the hot water in your house is scald-safe, reduce heat losses in the pipework, and reduce mixing in your thermal store.

£109.09 inc. VAT

Akvaterm

Akvaterm Geo Thermal Stores

Akvaterm AkvaGeo thermal stores are designed to be used with heat pumps and allow the heat pump to run at high efficiency for longer. Also available as solar and solar plus versions which are ideal for adding in other sources of heat.

LK Armatur Load units

The LK load units are built in Sweden to a very high specification and are designed to provide long term use and give accurate control of the water flow from a boiler stove. They are the unit of choice by most of our installers these days as they're so well made, so reliable and yet priced really well. The full unit, comprising the valve, pump, thermosyphon by-pass and gauges, comes as a neat and compact unit complete with insulating cover.

£602.72 inc. VAT

Woodfire Stoves

Woodfire CX8 contemporary boiler stove

The Woodfire CX8 stove is the smallest of the free-standing Woodfire stoves, with a total output of 8kW, 5.4kW to water and 2.6kW to air, making it ideally suited for use in low energy houses. The CX8 is a dedicated woodburning boiler stove which can be supplied with all the air it needs for combustion via an external air duct.

£1,985 inc. VAT

Save £262